NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!NO LOG FILE!!!
Parameter | HIS550R-C |
---|---|
Package | TO-39 / TO-5 |
Radiating element area | 11 mm² |
Radiating element emissivity | > 0.9 |
Radiating element temperature | 600 °C at 650 mW |
Optical output power | up to 190 mW |
Max. electrical power (DC) | 700 mW |
Max. electrical voltage | 4.0 V |
Max. electrical current | 175 mA |
Electrical cold resistance | 22 +/- 3 Ω (typ. 21...23 Ω) |
Electrical hot resistance | 22 +/- 3 Ω (typ. 21...23 Ω) |
Filter/Window | CaF₂ (glued) |
Wavelength range | 2 to 11 µm |
Filling gas | Nitrogen |
Parameter | DCB.39.700 |
---|---|
LDO regulator | LT3065 |
Input voltage (V_in) | (4.3 … 10 V) |
Pulse signal voltage Low/OFF | (0 … 1) V |
Pulse signal voltage High/ON | 1.5 V … V_in |
Drive power | 700 mW |
The Driver Circuit Board supports a quick evaluation of our IR emitters. Only a supply voltage and a pulse signal have to be applied to the 3-pin Molex PicoBlade 1.25 mm connector. For more information about its function, see our technical note.
Technical note for Driving Circuit Board for HISbasic - emitters (PDF)
HISbasic series handling instructions (PDF)
HISbasic series product overview (PDF)
Comparison of HISbasic emitters (PDF)
Quality policy of Infrasolid (PDF)
All our emitters comply with the following JEDEC-standards:
(temperature cycling and shock test: -45 °C / + 90 °C, 100 cycles)
(vibration test: log. sweep 20 Hz…2000 Hz, peak 20 g, X/Y/Z direction)
(drop test: 5000 m/s², 6 directions)
HISbasic series emitters have an integrated gold plated reflector that directs the radiation emitted from the rear to the front in order to achieve maximum efficiency. All our emitters offer minimum drift at a constant electrical resistance. Infrasolids IR emitters are characterized by a very low temperature coefficient of electrical resistance. Therefore the hot resistance and the cold resistance are almost identical which eases the electrical control of the IR sources.
Infrasolid’s infrared radiation sources are pulsable thermal emitters with a near black-body emittance. Based on a patented nanotechnology and a patented emitter set-up made of a high-melting metal, the free-standing monolithic radiating element and the nanostructured emitter surface offer numerous advantages in many applications.
Are you looking for other technical specifications or would you like a customized solution? Feel free to contact us!