Parameter | HIS20smd-0 |
---|---|
Package | SMD (3x3 mm²) |
Radiating element area | 0.32 mm² |
Radiating element emissivity | > 0.9 |
Radiating element temperature | 700 °C at 175 mW |
Optical output power | up to 15 mW |
Max. electrical power (DC) | 175 mW |
Max. electrical voltage | 1.25 V |
Max. electrical current | 140 mA |
Electrical cold resistance | 8.5 +/- 1 Ω |
Electrical hot resistance | 8.5 +/- 1 Ω |
Modulation frequency | 14 Hz* |
Filter/Window | None |
Wavelength range | 2 to 20 µm |
Filling gas | None |
Parameter | DCB.S3.175 |
---|---|
LDO regulator | LT3065 |
Input voltage (V_in) | (1.6 … 13) V |
Pulse signal voltage Low/OFF | (0 … 1) V |
Pulse signal voltage High/ON | 1.5 V … V_in |
Drive power | 175 mW |
The Driver Circuit Board supports a quick evaluation of our IR emitters and can be ordered as single component (without IR emitter) or assembled with an IR emitter of the HISsmd series. Only a supply voltage and a pulse signal have to be applied to the 3-pin Molex PicoBlade 1.25 mm connector. For more information about its function, see our technical note.
Technical note for Driving Circuit Board for HISsmd - emitters (PDF)
HISsmd series handling instructions (PDF)
HISsmd series product overview (PDF)
Comparison of HISsmd emitters (PDF)
Quality policy of Infrasolid (PDF)
All our emitters comply with the following JEDEC-standards:
(temperature cycling and shock test: -45 °C / + 90 °C, 100 cycles)
(vibration test: log. sweep 20 Hz…2000 Hz, peak 20 g, X/Y/Z direction)
(drop test: 5000 m/s², 6 directions)
HISsmd series emitters are small, powerful infrared radiation sources that meet the demands for reliable miniaturized gas sensors and offer a wide range of new application scenarios. The low energy consumption, the high efficiency and the small size allow the use in portable, battery-powered, and mobile applications. These innovative infrared light sources are used, for instance, in respiratory gas analysis, e.g. for the detection of CO₂ and breath alcohol, and in Smart Home and Smartphone applications. The pioneering SMD package enables a fully automated production in high-volume markets.
Infrasolid’s infrared radiation sources are pulsable thermal emitters with a near black-body emittance. Based on a patented nanotechnology and a patented emitter set-up made of a high-melting metal, the free-standing monolithic radiating element and the nanostructured emitter surface offer numerous advantages in many applications.
Are you looking for other technical specifications or would you like a customized solution? Feel free to contact us!