HIS550R-0

Thermal infrared emitter with gold plated reflector

Specifications

ParameterHIS550R-0
PackageTO-39 / TO-5
Radiating element area11 mm²
Radiating element emissivity> 0.9
Radiating element temperature600 °C at 650 mW
Optical output powerup to 195 mW
Max. electrical power (DC)700 mW
Max. electrical voltage4.0 V
Max. electrical current175 mA
Electrical cold resistance22 +/- 3 Ω (typ. 21...23 Ω)
Electrical hot resistance22 +/- 3 Ω (typ. 21...23 Ω)
Modulation frequency6 Hz*
Filter/WindowNone
Wavelength range2 to 20 µm
Filling gasNone
* 50 % modulation depth, square wave signal, 50 % duty cycle

Accessories

Driver Circuit Board DCB.39.700

DETAILS
ParameterDCB.39.700
LDO regulatorLT3065
Input voltage (V_in)(4.3 … 10 V)
Pulse signal voltage Low/OFF(0 … 1) V
Pulse signal voltage High/ON1.5 V … V_in
Drive power700 mW

The Driver Circuit Board supports a quick evaluation of our IR emitters. Only a supply voltage and a pulse signal have to be applied to the 3-pin Molex PicoBlade 1.25 mm connector. For more information about its function, see our technical note.

Document downloads

HIS550R-0 data sheet (PDF)

HIS550R-0 ZEMAX data (ZAR)

Technical note for Driving Circuit Board for HISbasic - emitters (PDF)

HISbasic series handling instructions (PDF)

HISbasic series product overview (PDF)

Comparison of HISbasic emitters (PDF)

HISbasic 系列光源竞品对比 (PDF)

ISO9001 certificate (PDF)

Quality policy of Infrasolid (PDF)

Main features

  • Package: TO-39/TO-5 with gold plated reflector
  • TO-39 cap without window
  • Radiating element area: 11 mm²

JEDEC compliance

All our emitters comply with the following JEDEC-standards:

JESD22-A104

(temperature cycling and shock test: -45 °C / + 90 °C, 100 cycles)

JESD22-B103

(vibration test: log. sweep 20 Hz…2000 Hz, peak 20 g, X/Y/Z direction)

JESD22-B110

(drop test: 5000 m/s², 6 directions)

Sample request

 Request your sample now

HISbasic series

Black-body infrared sources in TO-39 / TO-5 package

HISbasic series emitters have an integrated gold plated reflector that directs the radiation emitted from the rear to the front in order to achieve maximum efficiency. All our emitters offer minimum drift at a constant electrical resistance. Infrasolids IR emitters are characterized by a very low temperature coefficient of electrical resistance. Therefore the hot resistance and the cold resistance are almost identical which eases the electrical control of the IR sources.

Infrasolid’s infrared radiation sources are pulsable thermal emitters with a near black-body emittance. Based on a patented nanotechnology and a patented emitter set-up made of a high-melting metal, the free-standing monolithic radiating element and the nanostructured emitter surface offer numerous advantages in many applications.

Are you looking for other technical specifications or would you like a customized solution? Feel free to contact us!

HISbasic series overview

...loading table